https://dumpsarena.com/isc2-dumps/cc/

Use Dumps as a Supplementary Resource
While CC exam dumps can be useful, they should not be your only study material. Instead,
combine them with official textbooks, training CC Exam Dumps courses, and practice labs to
ensure a well-rounded understanding of the subject.
Understand the Concepts
Memorizing answers from exam dumps without understanding the reasoning behind them can be
risky. Certification exams often update their questions or change formats, so grasping the
underlying concepts is essential.

 What is the purpose of the Spanning Tree Protocol (STP) in a switched network?
a) To prevent routing loops
b) To prevent switching loops
c) To provide dynamic IP addressing
d) To enable VLAN trunking
 Which of the following commands is used to configure an interface with an IP address in
Cisco devices?
a) ip set address
b) interface ip assign
c) ip address
d) set interface ip
 In OSPF, what is the function of a Designated Router (DR)?
a) To forward packets between different OSPF areas
b) To reduce OSPF routing traffic on multi-access networks
c) To generate the OSPF LSA database
d) To summarize routes into a single network
 What is the default administrative distance of an EIGRP route?
a) 90
b) 100
c) 110
d) 120
 What protocol is commonly used to encrypt remote management traffic on Cisco devices?
a) Telnet
b) HTTP
c) SSH
d) FTP

https://dumpsarena.com/isc2-dumps/cc/

 In VLAN configuration, which mode must be enabled on a switch port to allow multiple
VLANs?
a) Access mode
b) Trunk mode
c) Dynamic mode
d) Hybrid mode

70% Off Offer Expire Soon >>>>>
https://dumpsarena.com/isc2-dumps/cc/

 Which layer of the OSI model is responsible for logical addressing?
a) Data Link Layer
b) Transport Layer
c) Network Layer
d) Session Layer
 What command is used to display the routing table on a Cisco router?
a) show ip routes
b) display routes
c) show routing-table
d) show ip route
 What type of NAT allows multiple internal IP addresses to share a single public IP address?
a) Static NAT
b) Dynamic NAT
c) PAT (Port Address Translation)
d) Source NAT
 Which of the following security features helps prevent unauthorized DHCP servers from
distributing IP addresses?
a) DHCP Relay
b) DHCP Snooping
c) ARP Inspection
d) Port Security
 What is the primary function of a router in a network?
a) Forward packets based on MAC addresses
b) Extend the wireless signal range
c) Forward packets based on IP addresses
d) Assign IP addresses to end devices

https://dumpsarena.com/isc2-dumps/cc/

 Which of the following is a characteristic of TCP but NOT UDP?
a) Connectionless communication
b) Guaranteed delivery of packets
c) Low overhead
d) Best-effort delivery
 Which type of attack involves an attacker intercepting communication between two parties?
a) Denial-of-Service (DoS)
b) Man-in-the-Middle (MITM)
c) Phishing
d) ARP Poisoning
 What is the purpose of HSRP (Hot Standby Router Protocol)?
a) To allow multiple routers to share the same IP address for redundancy
b) To provide automatic IP address assignment
c) To establish a secure connection between two routers
d) To filter network traffic
 Which wireless security protocol is considered the most secure for modern networks?
a) WEP
b) WPA
c) WPA2
d) WPA3


70% Off Offer Expire Soon >>>>>
https://dumpsarena.com/isc2-dumps/cc/