IPAC MATERIAL SAFETY DATA SHEET

PRODUCT NAME IPACIDE LWT 122

EFFECTIVE DATE January 1, 2007 PAGE 1 OF 3

SECTION 1 - PRODUCT IDENTIFICATION AND USE

PRODUCT NAME
IPACIDE LWT 122

PRODUCT USE
Microbiocide

MANUFACTURER
IPAC CHEMICALS LTD.
1620 West 75th Avenue
Vancouver, B.C.
V6P 6G2

TDG SHIPPING NAME
Not regulated

TDG CLASS
Not applicable

UN/PIN NUMBER
Not applicable

HMIS RATINGS
Health 1
Flammability 0
Reactivity 1
Personal Protection X


WHMIS CLASS
Not controlled

EMERGENCY TELEPHONE NUMBER (CANUTEC 24 HOURS) (613) 996-6666

SECTION 2 - HAZARDOUS INGREDIENTS


HAZARDOUS INGREDIENTS

APPROX.
CONC %

C.A.S.
NUMBER


EXPOSURE LIMITS


LD50/LC50 - SPECIES AND ROUTE

Poly [oxyethylene
(dimethyliminio) ethylene
(dimethyliminio) ethylene
dichloride]

10

31075-24-8

Not established

LD50 (oral, rat) = 1950 mg/kg
LD50 (dermal, rabbit) >2000 mg/kg

SECTION 3 - PHYSICAL DATA

PHYSICAL STATE
Liquid

APPEARANCE
Clear brown fluid



ODOUR
Slightly sweet odour

ODOUR THRESHOLD
(ppm)
Not available

VAPOUR PRESSURE (mm Hg)
Not available

VAPOUR DENSITY (Air =1)
Not available

EVAPORATION RATE
Slow

BOILING POINT (EC)
Approximately 100

FREEZING POINT (EC)
Approximately 0

SOLUBILITY IN WATER
(20EC)
Complete

% VOLATILE (by
weight)
Not available

pH
6 - 8

DENSITY (g/mL) (20EC)
1.025

COEFFICIENT OF WATER/OIL DISTRIBUTION
Not available

SECTION 4 - REACTIVITY DATA

CHEMICAL STABILITY
Stable

INCOMPATIBILITY WITH OTHER SUBSTANCES
None known

HAZARDOUS DECOMPOSITION PRODUCTS
None known






IPAC MATERIAL SAFETY DATA SHEET

PRODUCT NAME IPACIDE LWT 122

EFFECTIVE DATE January 1, 2007 PAGE 2 OF 3

SECTION 5 - FIRE AND EXPLOSION HAZARDS

FLAMMABILITY/COMBUSTIBILITY
This product is not classified as flammable or combustible according to WHMIS.

MEANS OF EXTINCTION
Use water fog, dry chemical, carbon dioxide, or chemical foam.

SPECIAL FIRE-FIGHTING PROCEDURES
Wear full protective equipment and self-contained breathing apparatus.

HAZARDOUS COMBUSTION PRODUCTS
Carbon monoxide may be released on burning.

FLASH POINT (EC) & METHOD
> 100 (TCC)

UPPER EXPLOSION LIMIT
(% BY VOLUME)
Not available

LOWER EXPLOSION LIMIT
(% BY VOLUME)
Not available

AUTO IGNITION TEMP. (EC)
Not available

TDG FLAMMABILITY CLASS
Not applicable

SENSITIVITY TO STATIC
DISCHARGE
Not sensitive

SENSITIVITY TO
MECHANICAL IMPACT
Not sensitive

SECTION 6 - TOXICOLOGICAL PROPERTIES

ROUTE OF ENTRY
Skin [ ] Skin [ ] Eye [ X ] Inhalation [ X ] Inhalation [ ] Ingestion [ ]
Contact Absorption Contact Acute Chronic

EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Mildly irritating to eyes; effects may vary depending on the length of exposure, solution concentration and first aid
measures. Non-irritating to the skin. May cause irritation or corrosion of mucous membranes and lungs if inhaled.
Exposed individuals should be monitored for respiratory distress, bronchitis or pneumonia.

EFFECTS OF CHRONIC EXPOSURE TO PRODUCT Not available

LD50
(oral, rat) calculated at 11,500 mg/kg

LC50
(inhalation, rat, 4 hour) 17.0 mg/L

EXPOSURE LIMITS
Not established

Carcinogen [ ] Reproductive [ ] Teratogen [ ] Mutagen [ ] Irritant [ X ] Sensitizer [ ]
Effects

SECTION 7 - PREVENTIVE MEASURES

PROTECTIVE GLOVES
Chemical resistant gloves required, chemically
impermeable rubber gloves recommended.

RESPIRATORY PROTECTION
If misting can occur, a NIOSH approved respirator is required.

EYE PROTECTION
Safety glasses required, safety goggles recommended.

PROTECTIVE FOOTWEAR
Steel-toed chemical resistant boots recommended.

PROTECTIVE CLOTHING
Safety protective clothing such as work coveralls or long
sleeve shirt and trousers is required. Chemical resistant
clothing (e.g. TYVEK suit) is recommended.

OTHER PROTECTIVE EQUIPMENT
An emergency shower complete with eye-wash fountain is
strongly recommended.



IPAC MATERIAL SAFETY DATA SHEET

PRODUCT NAME IPACIDE LWT 122

EFFECTIVE DATE January 1, 2007 PAGE 3 OF 3

SECTION 7 - PREVENTIVE MEASURES (Continued)

ENGINEERING CONTROLS
General ventilation usually adequate unless misting conditions are present.

LEAK AND SPILL PROCEDURES
Do not flush to sewer. Dike or contain. Absorb onto inert medium, package, and label for legal disposal.

WASTE DISPOSAL
Dispose of in accordance with Federal, Provincial, and Municipal regulations. Do not flush to sewer.

HANDLING PROCEDURES AND EQUIPMENT
Handle in accordance with good industrial hygiene practice. Wash thoroughly after handling. Avoid contact with eyes,
skin, and clothing.

STORAGE REQUIREMENTS
Store in a cool dry well-ventilated location. Protect from freezing. Keep containers tightly closed. Store away from
incompatible materials.

SPECIAL SHIPPING INFORMATION
Prevent from freezing.

SECTION 8 - FIRST AID MEASURES

SKIN
Immediately and thoroughly wash affected area with a mild soap and water. Get medical attention if irritation persists.
Launder contaminated clothing before reuse.

EYE
Immediately and thoroughly flush eyes, holding the eyelids open, with lukewarm, gently flowing water for at least 20
minutes, then seek immediate medical attention.

INHALATION
Remove victim from hazard. Apply artificial respiration if indicated. Seek medical attention.

INGESTION
Do not induce vomiting. Give conscious patients fluids. Call a physician and/or transport victim to an emergency medical
facility. Note: do not give fluids or induce vomiting if patient is unconscious.

GENERAL ADVICE

SECTION 9 - PREPARATION OF M.S.D.S.

PREPARED BY
Regulatory Affairs Department

PHONE NUMBER
(604) 261-3019

DATE
January 1, 2007

ADDITIONAL INFORMATION AND COMMENTS
Pest Control Products Act Registration No. 20923


Every effort is made to ensure that the data presented herein is current and factual; however, no warranty nor any other legal
responsibility is to be construed from this document. Numerical values reported represent nominal and/or typical properties and do not
constitute specifications. Any use of the information presented herein must be determined by the user to be in accordance with
applicable Federal, Provincial and local laws and regulations.