PROTECTING INDUSTRIAL ELECTRICAL SYSTEM
WITH 4 POLE MCCBS: AN ANALYSIS OF 100 TO
400 AMP MODELS
By Raghotham
INTRODUCTION
In this modern era, electricity has been the backbone of industries and factories as it helps
easily operate electrical appliances. But operating industrial applications is far different
from home as the industry requires operating heavy appliance that comes with some
security complications.
This is where MCCB comes into the picture. It is one of the most exceptional electrical
devices that boosts security at the factory. From boosting security and managing the
overload to switching current, MCCB brings a lot.
Over the years, 4 Pole mccb quickly gained attention and received a great response from
people compared to other makes. It is the electric device brought into the market to
manage overloading and other electrical breakdowns. It comprises four poles, and each
holds its own set of contact.
Its great ability to operate the electric system in industrial areas without letting it go
overload or trigger short circuits makes it the preferred choice for most people.
In this blog, we explore each AMP model of 4 Pole MCCB with its uses to help you make the
right choice for the best mccb for industrial depending on your needs.
3
BEST 4 POLE MCCB AMP FOR INDUSTRIAL USE
4 MCCB Pole is best in helping you operate the electrical system without any chance of electrical
fault. But every 4 Pole MCCB AMP varies depending on the requirement. Here we have listed the
most common and preferred 4 Pole MCCB AMP models:
100 amp 4 poles MCCB
The first and most valuable 4 Pole MCCB begins with a 100 AMP MCCB model, which acts as
electrical devices that encourage the electrical safety system. It can only restrict the passing
current of upto 100 AMPs. With 100 amp 4 Pole MCCB, you will have peace of mind using the
electrical system as it helps prevent overloading, short circuits, or any damage that may affect the
appliances.
Here is the list of uses of 100 amp 4 Pole Mccb:
Ideal for electric systems in industry: The most amazing use of 100 AMP 4 Pole MCCB is an excellent
response with managing the load and working of the appliances in the industrial area.
Construction: Construction is another fine sector that requires the excessive use of heavy
applications. With 100 AMP 4 pole MCCB, you can smoothly continue the construction process while
100 AMP 4 Pole Mccb manages the safety, security of appliances and even switch currents.
4
125 Amp 4 poles MCCB
125 AMP 4 Pole MCCB is among the most common 4 Pole MCCB mainly devoted to
preventing any damage to the appliances in use. 125 AMP 4 pole is restricted to the current
of up to 125 AMP current.
From making it easier to operate heavy machines to switching current before it affects the
appliance, 125 AMP has been the go-to choice for all business owners looking forward to
using heavy applications.
Here is the most common uses of 125 AMP:
• Ventilation and Heating: Ventilation and Heating are the most crucial and require the
active current that passes by. This is where 125 AMP 4 pole MCCB relieves the hassle by
preventing short circuits.
• Heavy machines: 125 AMP 4 Pole MCCB is specially catered to manage the heavy
electrical system in the industry. Count on this, and you won’t face any electrical faults
while you use the machines.
125 AMP 4 Pole MCCB comes with additional poles with 125 AMP current capacity that
ensure there is any appliance concern. The other pole contacts do not let short circuits
occur.
5
250 amp 4 poles MCCB
250 AMP 4 Pole MCCB is the perfect choice for those industries that frequently need
electrical applications so that short circuit is never a problem for you. With 250 amperes, you
can manage the current ratings of upto 250 amp mccb.
With its 4 pole contacts, it is built to protect every industry application from short circuits and
can render protection of upto 4 circuits simultaneously.
There are countless uses of 250 AMP 4 Pole MCCB in various industrial applications:
• Construction building: Constructing a building requires lots of power and electricity. With
250 AMP 4 Pole MCCB, you can smoothly operate the appliances without facing the
challenges of short circuits. This 4 Pole MCCB is built to protect upto 4 circuits with
immediate effect.
•
Industrial lighting: Lightning occupies most of the electricity in the industry so that you
can freely focus on work. With the 250 AMP 4 Pole, you do not have to stress down as it
helps power most of the lighting system and even ensures that it doesn’t show up short
circuits that may harm the system.
6
400 AMP 4 Pole MCCB
400 AMP 4 Pole MCCB is the list's highest level of amperes ratings. It acts as an electrical
device to protect from short circuits and overloading.
With ratings of upto 400 amp mccb, it can walk miles to protect the industry's wide range of
electrical systems. Using its 4 poles, it can prevent up to 4 electrical systems from
overloading, electrical hazard, or short circuits at the same time.
It is commonly used in spaces where the maximum power rating is needed to operate the
electrical system.
Here is how it has been very useful in the industrial space:
•
Industrial Motors: Industrial Motors are the most commonly used applications in the
industry, but it mostly comes with the risk of electrical fault. With 400 AMP 4 Pole
MCCB, you are on the safer side as it acts as the armor in saving from short circuits and
overloading and does not let any electrical fault occur.
• Building Lifts: Constructing lifts requires many electrical appliances with enhanced
safety to ensure the process goes well. This is where the 400 AMP 4 Pole MCCB comes
into action. It allows you to do all the construction work while it helps in providing
security to the electrical system from any short circuits and overloading.
7

https://www.eleczo.com/low-voltage-switchgear/mcb-miniature-circuit-breaker.html?current_rating=11894

Get your hands on 63 AMP MCB Switch to operate the heavy load
appliance without fear.
63 AMP MCB Switch is the highest level of ampere rating in the list, which is usually preferred
to manage the heaviest load equipment like product manufacturing machines. To shed more
light on 63, AMP MCB switch uses, here are the most common uses:
• High voltage is water geyser: Water geysers take up the most load in any premises. But 63
AMP MCB switch is here to combat and prevent any outbreak using the highest voltage
water geysers.
• Large electric motors: Motors are fast-moving electrical applications mostly used in
industries that also come with a rise of short circuits in case of overloading. With the most
exclusive and best 63 AMP MCB Switch in place, you can make the most of your motors and
freely operate the electric motor without the fear of overloading or short circuits.
8

https://www.eleczo.com/low-voltage-switchgear/mccb-moulded-case-circuit-breaker.html

ELECZO: GET ALL YOUR MCCB
SWITCHES COVERED UNDER ONE
ROOF.
Finally, you have the list of 4 most commonly used 4 Pole MCCBs in the industrial area. Each of them
purpose is to pass out the secure network to operate the electrical system while protecting it from
electrical faults like overloading and short circuits.
But now the question is, where can you get all your exclusive 4 Pole MCCB switches? Eleczo is your
ultimate solution here. With our reputation as India's biggest online electric store bringing you the
ultimate solution to buy electric products online.
Being the best dealers and distributors in India, we have catered to providing 4 Pole MCCB switches
from renowned brands that go well with the quality and budget. Besides MCCB, we aim to bring
together the list of various other electrical products for commercial and residential use. From
Scheinder and L&T to Siemens, we bring electrical products from popular brands to your rescue.
Count on us and get a standout shopping experience. Visit our website and get access to the best
deals and product that is sure to leave you amazed.

https://www.eleczo.com/

THANK YOU
www.eleczo.com