“Blast Your Bench II” page 1


Dear friend and fellow athlete,
I would like to thank you for ordering "Blast Your Bench II". This program
contains your complete training and nutrition cycle that will put you on the
fast track to getting great results! I'm confident that after you finish the
program you'll be very pleased with your progress.
1. First, read all of the information carefully. Then follow the "Blast
Your Bench" routine to boost your bench press strength.
2. After you finish the "Blast Your Bench" routine, follow the "Blast
Your Squat" routine to boost squatting strength.
3. When you have finished both the bench press and squat routines,
and have made some good gains in strength and muscle size. You
should follow the suggestions in the "How To Get Six Pack Abs"
program to lose any excess bodyfat and bring out your muscle
definition.
After you read through all of the material, if you have any questions
regarding the program you can e-mail me directly at:
help@leehayward.com
Please e-mail me and let me know about your progress!
all the best,

________________________________________
Lee Hayward
Certified Strength & Conditioning Coach
http://www.leehayward.com
http://www.blastyourbench.com
http://www.drugfreemuscle.com
http://totfit.safeshopper.com
**You should always consult your doctor before starting any exercise program**
Copyright © 2001 Lee Hayward
“Blast Your Bench II” page 2

Table of Contents


Introduction – page 1

Chapter 1. Program Overview – page 4

Chapter 2. Program Theory and Exercise Variables – page 5
•
Exercise Selection – page 5
•
Training Volume and Intensity – page 6
•
Rest Time Between Sets – page 7
•
Training Session Length – page 9
•
Training Session Frequency – page 9
•
Body Part Training Frequency – page 10
•
Repetition Speed – page 10
•
Progressive Overloads – page 11

Chapter 3. Benching For Maximum Poundage – page 12
•
Proper Bench Press Technique – page 12
•
Finding Your One-Rep Max – page 15

Chapter 4. Assistance Exercises – page 16

Chapter 5. Eating for Maximum Size and Power – page 26
•
Sample Eating Plans – page 26
•
Supplements – page 32

Chapter 6. The Blast Your Bench Routine – page 34
•
Training Partners – page 34
•
Warm Up Exercises – page 34
“Blast Your Bench II” page 3

Table of Contents


Chapter 7. The Workout Charts – page 36
•
Assistance Exercise Workout – page 42

Chapter 8. Additional Information – page 43

Chapter 9. One Rep Max Chart – page 44

Chapter 10. Nutrition Charts – page 50

Special Bonus "Blast Your Squat" – page 55
•
Proper Squat Technique – page 56
•
Assistance Exercises – page 62
•
Assistance Exercise Workout Routine – page 68

General Workout Routines – page 69

Workout Charts to Track Your Progress – page 74

Exercise Videos – available on the “Blast Your Bench” members website
(http://www.leehayward.com/members)

Special Bonus “How To Get Six Pack Abs” – page 78

“Blast Your Bench II” page 4

1. Program Overview

Congratulations on your decision to increase your muscle size and strength by choosing
the "Blast Your Bench" program. Please read the contents of this program thoroughly. To
get the maximum benefit from this program you must strictly follow the exercise and diet
plan; please do not add your own variations to the program as this will slow your
progress. This program is based upon training and nutrition concepts that have been
proven to work. But it doesn't mean that the program is easy! You are going to have to
work hard to reap the ultimate benefits. The "Blast Your Bench" program will
show how to achieve maximum growth, but there are no shortcuts or excuses.
"Blast Your Bench" is an awesome shock routine that will rapidly increase your bench
press strength. Gains of 30, 40, 50, and even as much as 60 pounds are not uncommon
with this 3 week training routine!
There is also a Special Bonus Report Included at the end of the program. This is a
modified version of the "Blast Your Bench" training system that will focus on increasing
your squatting strength.
In the program we will explain the training methods and techniques. You will learn
exactly step by step what you need to do in order to achieve maximum results. We will
cover proper nutrition and supplementation, ways to increase your natural anabolic
hormones, techniques to speed recovery, and much more!
So without any further delay, let's get started!
“Blast Your Bench II” page 5

2. Program Theory and Exercise Variables

This section will cover some of the concepts and theories that we use in the "Blast Your
Bench" training system. This will give you an overview of how the program works.
The "Blast Your Bench" program is a specialized training routine that you can use every
couple of months to help boost your strength and muscle growth. One might think that if
I can gain 30+ lbs. to my bench in 3 weeks, then I can gain 60+ lbs. in 6 weeks, or 90+
lbs. in 9 weeks, etc... I am sorry the program does not work like that. You will need to
follow a balanced total body workout routine that focuses on developing all areas of your
body equally for the majority of your workouts. Save the "Blast Your Bench" program as
a "shock routine" for getting past training plateaus.
At the end of the program I have included some sample total body workout routines that
you can follow after you complete the "Blast Your Bench" program. These routines will
allow you to maintain the gains that you made during the "Blast Your Bench" program,
and make more improvement in your strength and muscle growth.
A: Exercise Selection
Compound vs. Isolation Exercises
Compound exercises work multiple muscles across more then one joint. Bench press,
dips, and squats are examples of compound exercises. Isolation exercises work fewer
muscles across a single joint. Dumbbell flyes, pec deck, and leg extensions are examples
of isolation exercises.
Some people believe that in order to target a certain muscle you should use more
isolation exercises and thus develop that muscle more efficiently. However, this is not the
best approach. Isolation exercises that work the muscles across a single joint are not the
most effective way to build muscle. Compound exercises are far more effective in
building muscle because they incorporate the use of several muscle groups, allow for a
heavier training load, and work more muscle mass in the same amount of time.
Let's look at the squat. It is a compound exercise. It works the quadriceps, hamstrings,
gluteus, lower back, abdominals, calves, and the abductors. Squats allow for heavy
weights to be lifted. This makes the squat an incredibly effective muscle building
exercise. Compared to an isolation exercise such as the leg extension, which only focuses
on the quadriceps, you can see how much more productive compound exercises are for
building muscle.
“Blast Your Bench II” page 6

Free Weights VS. Machines
Free weight exercises are more effective for building muscle then machine exercises.
Machines make exercises easier to perform. You do not have to balance the weight with
machine exercises because the machine balances the weight for you. You will get less
muscle stimulation from machine exercises because they do not require the same
concentration or effort as free weight exercises. Free weights have a greater ability to
involve stabilizer muscles than machines. Free weights put you in a natural, 3
dimensional environment for exercise.
B: Training Volume and Intensity
Traditionally, bodybuilders who wanted to maximize muscle size emphasized training
volume. And power lifters and strength athletes emphasized intensity. Many bodybuilders
have misunderstood the definition of high intensity training during the last several years.
Most people believe that "high intensity training" means working harder during your
workouts. However, this is not an accurate definition of training intensity.
What is Volume and Intensity?
Training volume can be defined as the measure of total weight lifted in a workout. It
determined by multiplying the weight lifted by the repetitions by the number of sets
performed.
Volume = weight X reps X sets
Example (1)
If someone bench pressed 200 pounds for 5 sets of 10 reps each.
200 lbs. X 10 reps X 5 sets = 10,000 lbs.
Total Volume = 10,000 lbs.
“Blast Your Bench II” page 7

Intensity measures the average weight lifted during a workout. Intensity is determined by
dividing the volume of weight lifted by the total number of reps performed.
Example (2)
If someone bench pressed:
Set 1: 250 lbs. X 6 reps = 1500 lbs.
Set 2: 300 lbs. X 4 reps = 1200 lbs.
Set 3: 350 lbs. X 2 reps = 700 lbs.
Total Intensity = 3400 lbs. / 12 reps = 283.3 lbs.
The total intensity for example (1) equals 200 lbs. because the same weight was used for
each set. In example (2) the total volume was lower then in example (1), but the intensity,
or average weight lifted, was higher.
Our training system uses the proper combination of both volume and intensity to create
the best environment for muscle growth. We will explain this in more detail later in the
program.
Weight and Repetitions
Our main goal is to build the maximum amount of muscle size and strength. Because of
this you have to systematically adjust the volume and intensity of your workouts. Some
days we will focus on high volume training, while on other days we will focus on high
intensity training. We will elaborate on this later in the program.
C: Rest Time Between Sets
The time you rest between sets can have a lasting impact on your muscle growth. But
most trainers and bodybuilders under emphasize the importance of rest time between sets.
They simply rest until they feel ready to do another set, or they wait until their training
partner completes his/her set before they do another set.
The rest time you allow your body between sets will determine the way your body uses
energy sources during exercise.
“Blast Your Bench II” page 8

There are 3 basic energy systems:
• Adenosine Triphosphate and Phosphocreatine or (ATP-PC)
• Lactic Acid
• Aerobic Energy System
All 3 are used when you exercise, but one will dominate depending on what type of
exercise you are doing.
Adenosine Triphosphate and Phosphocreatine
The ATP-PC system is the most powerful energy source. This is the energy we use for
short bursts of exercise. In fact this powerful energy supply becomes exhausted in less
then 30 seconds. This energy dominates when lifting maximum weight for a single
repetition.
ATP-PC is stored in the muscles. No oxygen is required to release this energy, so it is
called an anaerobic energy source. You often see power lifters briefly hold their breath
while they lift a 1 rep max weight.
It takes a while for your body to replenish its ATP-PC energy supply. This is why you
will often see power lifters and Olympic lifters resting for 3 or more minutes between
sets when lifting maximum weights.
Supplementing your diet with Creatine Monohydrate can help provide your body with
more ATP-PC energy.
Heavy power training workouts cause the body to increase levels of testosterone.
Lactic Acid
The lactic acid system produces more energy overall then the ATP-PC system. But it
cannot generate the intense burst of power that the ATP-PC system can. Athletes such as
boxers and wrestlers use the lactic acid system for energy.
The burn that you get in the muscles after a long, hard set is caused by lactic acid build
up. The lactic acid system allows for more training volume. If your rest time between sets
is short and you move quickly through your workout, your body cannot restore the ATP-
PC energy. So glucose molecules that are stored in the muscles will break down to
produce more ATP-PC energy. Lactic acid builds up as a waste product from this
process.
Hard fast paced workouts cause the body to increase levels of growth hormone.
“Blast Your Bench II” page 9

Aerobic Energy System
The aerobic energy system is used when doing exercise like walking, jogging, or any
other long lasting, low intensity activity. The main reason for doing this type of exercise
is to improve cardiovascular fitness. This system is less powerful then the ATP-PC and
Lactic Acid systems and is of less importance in weight lifting. However, it does help
with recovery.
The aerobic energy system uses fats and carbohydrates in the body for fuel. It does not
produce waste products like the ATP-PC and Lactic acid systems, so it can provide great
amounts of energy over long periods of time. Marathon runners use aerobic energy as
their primary energy system.
In order to maximize muscle growth, we need to systematically vary the rest periods
between sets during weight training workouts. This way we can utilize the different
energy systems and take advantage of the benefits that they provide. This is explained
fully in the workout charts later in the program.
D: Training Session Length
Years ago people believed that the longer a workout lasted, the better it was for building
muscle. But today most people realize that this is not true. Those 2-3 hour long workouts
are a thing of the past.
There have been numerous studies that have shown that after 45 minutes of hard weight
training the body's natural blood testosterone levels are decreased by as much as 80%.
What this means is that after 45 minutes you have depleted one of the body's most
important recovery tools: testosterone. By training past 45 minutes you will not be getting
the growth that you should be getting from the effort that you are putting in.
Limiting your training sessions to 45 minutes will also help the body to utilize glucose
(carbohydrates) for energy and aid energy production in the muscle cells. This will ensure
optimal performance in the gym.
Note: Limit your actual weight training session to 45 minutes. This does not include
warming up before training and cooling down after training. If you include the warm up
and cool down time, your workouts should last about 60 minutes.
Another advantage of shorter workouts is that you will recover quicker and be able to hit
the gym more often, thus expanding your opportunity for growth.
“Blast Your Bench II” page 10

You will also benefit mentally from shorter workouts as well. Because if you were to go
into the gym for a 2+ hour workout you would not give it your all, you would be holding
back and trying to conserve energy so you could complete the long training session.
However, with a shorter workout you enter the gym with a positive attitude and ready to
devote all your energy and effort to the task at hand.
E: Training Session Frequency
As long as you keep your workouts short (i.e. 45 minutes or less) you can workout
frequently. In fact you could train 2 times a day, 6 days a week with no problem. Now of
course you don't have to do this, but the body can handle a much bigger workload then
most people realize. For example, some Olympic athletes train as much as 8 hours a day
when preparing for competition!
The real problem with a lot of bodybuilders is not over training, but under training. Fear
of over training holds people back from achieving maximum muscle growth.
F: Body Part Training Frequency
Soreness is no indicator of proper recovery. Sore or not a muscle can be trained and still
grow. By training at peak efficiency and eating a diet high in protein and nutrients you
can train the same body part daily and achieve phenomenal results.
Note: If you feel "extra sore", and what I mean by that is if you are so sore that it will
hinder your performance in the gym. Then you should take a day off from training. It is
best to play it safe then to risk the chance of injury. But if you are only "mildly sore" you
can train and still make progress.
G: Repetition Speed
Many trainers say that you should perform each rep very slow and controlled. Some
people will tell you to "go for the burn" and that the pain you get from doing super slow
reps is necessary for muscle growth.
But our muscles are designed for speed. The faster you can move a weight through space
the more stress is applied to the muscles. Two things that stimulate muscle growth are the
amount of weight that you lift, and the speed of the muscle contraction. When you do
slow reps you must lift lighter weights and contract your muscles slower. So this is
actually preventing you from stimulating the muscles to the maximum.
Now at the same time if you lift the weight too fast and use momentum to lift the weight
you will take the stress off the muscles and risk injury.
“Blast Your Bench II” page 11

The best approach is to perform each repetition as quickly as possible while still
maintaining proper exercise form and control of the weight. This will produce the
maximum stress on the muscles while reducing the risk of injury.
H: Progressive Overloads
Progressive overload can be achieved in a variety of ways: increasing the reps, increasing
the weight, decreasing rest time between sets, adding another set, etc.
In the "Blast Your Bench" program we will focus on increasing the weight. The sets,
reps, and rest times are already laid out for you in the workout charts. The only variable
that you will change is the amount of weight that you are lifting. While following the
"Blast Your Bench" program you should strive to increase your poundage's by 5 lbs. each
workout. We will cover this in more detail in the workout charts.
“Blast Your Bench II” page 12

3. Benching For Maximum Poundage






For the next three weeks you will be prioritizing the Bench Press in order to build as
much strength and power as possible. While you are on this program, you should be
constantly trying to increase the weight you are lifting in the Bench Press. Your other
body part workouts will be put on the back burner as you perform more of a maintenance
type workout for the rest of the body. This allows maximum recovery for the chest,
shoulders, and triceps, the main muscle groups that will be worked with this Bench Press
program.
A: Proper Bench Press Technique
To increase your Bench Press poundage you do not concentrate on strict isolation, but
rather on developing power in the muscles. That means that you must use your entire
body to lift the weight.
Position yourself on the bench and try to arch the back as much as possible while keeping
the shoulders, head, and butt on the bench. This position will lessen the distance the bar
must travel and will also allow the legs to drive the shoulders into the bench for much
greater power. Your feet should be flat on the floor, shoulder width apart. Grab the bar
just a bit wider then shoulder width. Tighten your entire body and squeeze your shoulder
blades together behind you. Then you flex your butt and press your feet into the floor.
Get a spotter to help you lift the weight off the rack. You will waste energy and make it
harder to get in the right position if you lift the weight off the rack by yourself.
“Blast Your Bench II” page 13

Grip the bar firmly and tuck your chin into your upper chest, when you are ready to lower
the bar inhale and expand your chest and belly, this will help you generate more power.
As you lower the bar keep your elbows tucked so that your upper arms are at a 45 degree
angles to the sides of your body. Do not let your upper arms go straight out to the sides
because it will place too much strain on your shoulder joints and reduce your power.
Lower the bar to the point where your chest and abdominals meet. Keep the bar directly
over your wrists and elbows. As soon as the bar touches your body, you need to generate
as much thrust and energy as you can, to power the bar back up.
Exhale as you lift the weight up. Push the bar up in a straight line. Keep your chest and
shoulders tight, keep your elbows tucked, and focus on benching with the triceps. Once
you lift the bar off your chest straighten out the arms using the triceps to lock out the rep.
Before you begin the workout routine that is outlined in the "Blast Your Bench" program,
take a couple of days and work on perfecting your bench press technique. Start off with a
light weight and follow the steps that are outlined above. This will help you understand
and get the feel of the proper bench press technique.

“Blast Your Bench II” page 14


Start / Finish Position of the Bench Press

Midpoint of the Bench Press




“Blast Your Bench II” page 15

B: Finding Your One-Rep Max
Before you start the "Blast Your Bench" routine you need to determine your current 1 rep
max. After you finish the program you will determine your 1 rep max again in order to
judge your progress.
To determine your 1 rep max you should not train for 48 hours. You should also perform
the test before you do any other exercise. If you try and test your 1 rep max after a hard
workout you will not be able to lift maximum weight. You need to warm up properly
(refer to the warm up section of this program) and have an experienced spotter handy just
in case you need help lifting the barbell.
Here's how to determine your 1 rep max.
Note: you can refer to the One Rep Max chart at the end of this program to help you
determine what weights you should lift.
1. Do a couple of light sets for 5 reps. (do not wear your self out with too many reps)
2. Rest 2 minutes.
3. Increase the weight and do a set of 3 reps.
4. Rest 2 minutes.
5. Increase the weight and do another set of 3 reps.
6. Rest 3 minutes.
7. Increase the weight and do a single rep.
8. If you fail to lift the weight, rest 3 minutes, reduce the weight, and try to do a
single rep again. If you succeeded in lifting the weight, rest 3 minutes, increase
the weight, and try to do a single rep again. Keep repeating this process until you
have found the maximum weight that you can lift for a single rep.
9. Write down your 1 rep max and the date you lifted it, this will help you judge
your progress.
“Blast Your Bench II” page 16
4. Assistance Exercises

It is important to include assistance exercises to strengthen your other body parts and to
help increase your bench press poundage.
Bent Over Dumbbell Flyes:
This exercise will develop the rear delts. The bench press places a lot of stress on the
front delts. So by working the rear delts you will balance out your shoulder development
and prevent shoulder injuries that are very common with heavy bench pressing.
Make sure to keep a slight bend in your knees and your keep your back flat. Really
squeeze your real deltoids and bring your shoulder blades together when doing this
exercise.


“Blast Your Bench II” page 17

Start / Finish Position of the Bent Over Dumbbell Flye


Midpoint of the Bent Over Dumbbell Flye





“Blast Your Bench II” page 18

Bent Barbell Rows:
This exercise will develop the lower back and the lats. This will help you to stay tight and
increase your power in the bench press. A strong back will help you to rebound the bar
off your chest and generate explosive power.
Have a slight bend in your knees and keep your upper body at a 45 degree angle. Arch
your back, let your butt stick out behind you, expand your chest and belly. This will help
you to generate power as you row the barbell into your belly.

“Blast Your Bench II” page 19


Start / Finish Position of the Bent Barbell Row


Midpoint of the Bent Barbell Row




“Blast Your Bench II” page 20


Ab Crunch:
This exercise will develop the abdominals. The back and abdominals are the centre of the
body so developing these muscles is vital to improving your strength and power in all
exercises.
Place your hands behind your head to support your neck. Really squeeze your abs at the
top of each rep.


“Blast Your Bench II” page 21

Start / Finish Position of the Ab Crunch

Midpoint of the Ab Crunch




“Blast Your Bench II” page 22

Squat:
This exercise will develop the thighs, lower back, hips, and glutes. Developing these
muscles will improve your bench press strength because they work together to stabilize
your entire body on the bench.
Flex your trapezius muscles so the bar does not hurt the top of your shoulders. Keep your
feet wider then shoulder width, look forward, and squat down until the tops of your
thighs are parallel to the floor. Let your back arch slightly, expand your belly, and stick
your butt out as you squat down.

“Blast Your Bench II” page 23


Start / Finish Position of the Squat

Midpoint of the Squat



“Blast Your Bench II” page 24



Standing Calf Raise:
This exercise will develop the calf muscles. Strong calf muscles work together with the
thighs, lower back, hips, and glutes to stabilize your body while doing heavy bench
presses.
Keep your legs straight during this exercise, you should use only your calf muscles to lift
the weight. Allow your calf muscles to extend all the way down for a good stretch at the
bottom or the rep. Then stand up on your tippy toes and flex your calf muscles hard at the
top of the rep.


“Blast Your Bench II” page 25

Start / Finish Position of the Standing Calf Raise


Midpoint of the Standing Calf Raise



“Blast Your Bench II” page 26

5. Eating for Maximum Size and Power

Diet is critical to gaining strength. You will never gain size and power if you do not eat
enough protein and calories to fuel your training and to repair muscle tissue. On this
program, you will have to eat a lot of protein (chicken, eggs, milk, red meat, turkey, fish,
protein supplements, etc.) to repair muscle tissue and to keep your body in an anabolic
state. Your diet will also include lots of carbohydrates (bread, pasta, potatoes, oatmeal,
cereals, fruit, vegetables, etc.) to keep your muscles full of glycogen and to provide
energy. In addition you will have to eat a moderately high amount of fat (peanut butter,
cheese, regular milk, butter, salad dressings, whole eggs, red meat, etc.).
This may surprise you, because most of the time you are told that you should eat a low fat
diet. But you will notice that if you increase your fat intake during the 3 weeks that you
are on the "Blast Your Bench" program, your muscles will feel fuller and you will get a
great "pump" when you workout. Fat also helps with the production of anabolic
hormones such as testosterone.
While you are trying to increase your strength you should eat approximately 20 calories
per pound of bodyweight and a minimum of one gram of protein per pound of
bodyweight. So a 200 pound person would eat 4000 calories and at least 200 grams of
protein per day. It is okay to go out for a burger and fries or pizza while you are on the
"Blast Your Bench" program. This is not a free ticket to pig out on junk food all of the
time. But while you are in hard training and trying to gain maximum mass and strength, it
will give you extra calories to fuel your training.
Note: you can refer to the nutritional charts that are at the end of the program to see how
much protein, carbs, fat, and calories are in dozens of different foods.
Eat a meal every 2-3 hours. This will give you a steady supply of protein and calories
throughout the day. Eating several small meals a day makes eating a lot of food much
easier on your digestive system. You will also need to drink at least 1 gallon of water
each day to maximize muscle growth, keep your body hydrated, help with digestion, and
rid your body of toxins.
With each meal try and eat a protein food, a starchy carbohydrate food, and a fruit or
vegetable. This will ensure that you are getting the proper nutrient intake.
If you find eating a lot of solid food difficult and time consuming you can include protein
drinks, meal replacement drinks, meal replacement bars, etc. in your diet to help you get
the required protein and calories.
“Blast Your Bench II” page 27

If you are not accustomed to eating a lot, increase your food intake gradually over the
course of several days. This will make it easier on your digestive system, rather then
going all out and probably make yourself stomach sick from the extra volume of food.
A: Sample Eating Plans
Here are a few sample eating plans that you can follow.
Note: these are just examples, you can substitute different foods then the ones that are
listed here. Just make sure to include a combination of proteins, carbohydrates, fruits,
and vegetables.
Sample Eating Plan 1:
Meal 1:
- 1/2 pound of ground beef
- 2 slices of toast with peanut butter
- piece of fresh fruit
Meal 2:
- protein or meal replacement drink mixed with milk
- piece of fresh fruit
Meal 3:
- 5 boiled eggs
- 1 cup of mixed veggies with butter
- baked potatoe with butter
Meal 4:
- high protein meal replacement bar
- sandwich (made with ham, cheese, lettuce, tomatoe, mayo, etc.)
Meal 5:
- 2 chicken breasts
- 2 cups of rice
- 1 cup of mixed veggies with butter
Meal 6:
- protein or meal replacement drink mixed with milk
- 2 slices of toast with peanut butter
- piece of fresh fruit

“Blast Your Bench II” page 28

Sample Eating Plan 2:
Meal 1:
- ham and sausage
- hash browns
- glass of orange juice
Meal 2:
- tuna fish sandwich
- piece of fresh fruit
Meal 3:
- protein or meal replacement drink mixed with milk
- bran muffin
- piece of fresh fruit
Meal 4:
- 1 cup of cottage cheese
- 2 slices of toast with butter
- 1/2 cup of raisins
Meal 5:
- bar BQ steak
- baked potatoe
- broccoli with cheese
Meal 6:
- 1 cup of yogurt
- 1 cup of grapes
- 2 slices of cheese

“Blast Your Bench II” page 29

Sample Eating Plan 3:
Meal 1:
- 1 bowl of oatmeal or high fiber cereal with milk
- omelette (made with eggs, cheese, mushrooms, onions, etc.)
- piece of fresh fruit
Meal 2:
- hamburger with cheese, lettuce, tomatoe, mayo, etc.
- french fries
Meal 3:
- protein or meal replacement drink mixed with milk
- piece of fresh fruit
Meal 4:
- 1 can of tuna fish mixed with mayo
- garden salad with dressing
- 2 bread rolls
Meal 5:
- 4 chicken enchiladas
- mixed veggies with butter
Meal 6:
- protein or meal replacement drink mixed with milk
- 2 slices of whole grain bread with fruit jelly

“Blast Your Bench II” page 30

Sample Eating Plan 4:
Meal 1:
- 5 eggs
- 5 pancakes with syrup
- 1 cup of apple sauce
Meal 2:
- 2 chicken breasts
- 2 cups of rice
- piece of fresh fruit
Meal 3:
- 8 oz of mozzarella cheese
- 10 crackers
- 2 carrot sticks
Meal 4:
- high protein meal replacement bar
- piece of fresh fruit
Meal 5:
- pan fried cod fish
- french fries
- garden salad with dressing
Meal 6:
- 1 bowl of oatmeal or high fiber cereal with milk
- 1 cup of cottage cheese

“Blast Your Bench II” page 31

Sample Eating Plan 5:
Meal 1:
- bacon and eggs
- 2 slices of whole grain toast with fruit jelly
- piece of fresh fruit
Meal 2:
- 6 shrimp sauteed in butter
- 2 cups of broccoli with cheese
- 2 cups of rice
Meal 3:
- 4 beef tacos
- garden salad with dressing
Meal 4:
- hot turkey breast sandwich
- mashed potatoes
Meal 5:
- broiled salmon with lemon slices and mushrooms
- mixed veggies with butter
- pasta with tomatoe sauce
Meal 6:
- protein or meal replacement drink
- 1 cup of yogurt

Note: you should add a tablespoonful of safflower oil and a tablespoonful of flaxseed oil
to your protein and meal replacement drinks. This helps to add extra calories and
essential fatty acids to your diet.
“Blast Your Bench II” page 32

B: Supplements
Supplements are not essential to your success, but they can help provide your body with
the nutrients that it needs for muscle growth.
Here are some basic supplements that I recommend:
Protein powders, meal replacement powders, and high protein bars:
As was mentioned above these supplements can help you get extra protein and calories in
your diet.
Multivitamins:
You should take a multivitamin / mineral supplement such as Centrum. Take one tablet 3
times a day with meals, take 3 tablets each day even if the label says "one a day", because
weight training places a lot of stress on your body and you will need the extra vitamins
and minerals to help build and repair muscle tissue.
Note: you can usually find a drug store or supermarket brand of multivitamin / mineral
supplements that contain the same potency as Centrum but cost much less.
Vitamin C:
You should take 1000 milligrams of Vitamin C, 3 times a day with meals. Vitamin C is
important for keeping your immune system strong, reducing muscle soreness, and
improve muscle growth and recovery.
Note: you can usually find an inexpensive drug store or supermarket brand of vitamin C.
“Blast Your Bench II” page 33

Creatine Monohydrate:
Creatine can produce noticeable gains in lean mass, strength, and energy in a very short
time. Most people find that within a week of taking creatine their muscles become fuller
and they get better pumps when working out.
Muscles consist of approximately 80% water. Creatine helps to draw water into the
muscle cells producing what is called cell-volumization. This makes the muscles feel full
and pumped. Studies show that when a muscle cell is volumized it helps to stimulate
protein synthesis and minimize protein breakdown.
The best way to take creatine is to mix a level teaspoonful of creatine (approx. 5 grams)
with a glass of kool aid or some other high sugar drink. The reason for the high sugar is
to cause your body to release insulin; this will allow your muscles to absorb the creatine
much better. There have been several studies done which prove that taking creatine with
insulin releasing carbohydrates (sugars) increases the uptake of creatine by the muscle
cells.
When you start taking creatine do a loading phase by taking 5 servings (approx. 25
grams) of creatine in divided doses throughout the day for a week, and then reduce to a
maintenance phase of 1 - 2 servings (approx. 5 - 10 grams) per day.
Be sure to take a serving of creatine right after your workouts because the metabolic
environment created by a hard workout will allow your muscles to absorb the creatine
really well.
After your workouts you should have a large protein and carbohydrate drink mixed with a
teaspoonful of creatine. For example, after my workouts I mix 2 scoops of whey protein,
2 tablespoonfuls of normal table sugar, and 1 teaspoonful of creatine in a shaker cup.
The sugar provides simple carbohydrates that cause the body to release insulin. After a
hard weight training workout, insulin will help shuttle protein, carbs, and creatine into the
muscles and help with growth and recovery.
Wait 30 minutes after you have the post workout protein / carb / creatine drink before you
eat any solid food. This allows your body time to digest the nutrients. Whole food slows
digestion because the body has to break it down, whereas liquid is digested faster.
You can get a 5 lb. Container of Whey Protein for only $28 at:
http://totfit.safeshopper.com/81/573.htm
You can get 1000 grams of Pure Creatine Monohydrate for only $25 at:
http://totfit.safeshopper.com/27/213.htm
“Blast Your Bench II” page 34

6. The Blast Your Bench Routine

As was mentioned earlier you will focus on increasing your Bench Press and on
maintenance for your other body part workouts. The workout routine is laid out for you in
workout charts. You will be working out five days a week, ideally Monday would be day
1 and Friday would be day 5. However if this does not suit your schedule, you can follow
the program on any five consecutive days of the week.
A: Training Partners
You should find a good training partner to follow the "Blast Your Bench" program with
you. By having a training partner you can encourage and provide motivation for each
other. You will also be able to spot each other and provide assistance when necessary.
You will need to find someone who is just as committed to making progress as you are.
Training with someone who is a slacker in the gym will only bring you down as well. If
you can, train with someone who is stronger then you are, this will really help motivate
you to improve.
B: Warm Up Exercises
Prior to working out, warm up thoroughly by doing 5 minutes of light cardio (stationary
bike, treadmill, jogging in place, etc.). Then do the following stretching and warm up
exercises to prevent injury and allow you to lift maximum weight in the bench press.
Arm circles:
Keep your arms straight and perform arm circles forwards and backwards. Do 15-20
circles in each direction.
Push ups:
Do a couple sets of push ups (approx 20-30 reps total). Do not work too hard, you only
want to get the blood flowing and warm up your joints.
Arm rotation for the rotator cuff:
Warm up your shoulder joints by standing with your arms straight out to the sides, bend
your elbows so they are at 90 degree angles. Rotate your arms so that your forearms point
up and then rotate your arms so that your forearms point out in front. Do 20-30 rotations.
“Blast Your Bench II” page 35

Rear dumbbell flyes:
Hold a pair of light dumbbells and bend over at the waist. Keeping your back parallel to
the floor, move just your arms and lift the dumbbells to the back in a fly motion. Really
focus on squeezing the back of your shoulders together as you lift the dumbbells. Do 3
sets of 15-20 reps.
Bench press:
Do a couple light sets of the bench press, do only 5-10 reps per set. Do not work too hard,
you only want to get the blood flowing and warm up your joints.
After doing the warm up you are ready to do the actual workout. Start the workout with
the Bench Press routine when you are fresh and strong, then perform the other exercises
after the bench press portion of the workout.
After you finish your workout do some light stretching for all of the muscles that you
worked. Then do some light cardio such stationary bike, treadmill, etc. for about 5
minutes, this will help reduce muscle soreness, speed recovery, and help with muscle
growth.
“Blast Your Bench II” page 36

7. The Workout Charts

Before you start the actual “Blast Your Bench II” routine. Stop doing the flat bench press
for the next 2 weeks. This will give your joints, tendons, and ligaments a break from
bench pressing while still strengthening the muscles used in the bench press.

For the next 2 weeks follow this workout routine:

Chest, shoulders, and triceps
rest
Back and biceps
rest
Legs and abs
rest
Repeat workout cycle

Chest, Shoulders and Triceps workout:

- Incline bench press
warm up with couple light sets and then do 5 sets of 5 reps
(train heavy, but don't train to failure)

- DB bench press on the stability ball
4 sets of 10 reps
(you will have to start off light, because this exercise is
hard to do)

- Seated db shoulder press
4 sets of 10 reps

- Bent over lateral raises
4 sets of 10 reps

- Tricep push downs
4 sets of 10 reps

- Push ups
3 sets of as many reps as you can do
“Blast Your Bench II” page 37

Back and Biceps workout:

- Bent over barbell rows
4 sets of 10 reps

- Chest supported row (i.e. T-bar row, hammer strength seated row, etc.)
4 sets of 10 reps

- Chin ups
3 sets of as many reps as you can do

- Standing db curls
3 sets of 15 reps

- Standing barbell curls
3 sets of 10 reps

- Hyper back extensions
3 sets of 15 reps

Legs and Abs workout:

- Squats
warm up with couple light sets and then do 5 sets of 5 reps
(train heavy, but don't train to failure)

- Lying leg curls
4 sets of 10 reps

- Leg extensions
4 sets of 10 reps

- Standing or seated calf raises
4 sets of 15 reps

- Incline sit ups
4 sets of 15 reps

- Leg raises
4 sets of 15 reps

- Crunches
3 sets of 25+ reps

“Blast Your Bench II” page 38

The “Blast Your Bench II” Routine
After you have followed the above routine for 2 weeks you then are ready for the “Blast
Your Bench II” routine.
For you chest, triceps, and front deltoids you will do the Bench Press routine as is shown
in the workout charts.
The Bench Press routine is where you push yourself. The rest time between sets for the
Bench Press routine is very important. You need to get a stopwatch to help you keep
track of the rest time between sets. By varying your reps and rest periods between sets, as
is shown in the workout charts, you will get maximum development in both the fast and
slow twitch muscle fibres. This will also help the body to increase levels of testosterone
and growth hormone.
Throughout the 3 week bench program, you will do only the Bench Press for your chest,
triceps, and front deltoids. This will help you to perfect your technique and to strengthen
the muscles used in the lift. This program will enhance both strength and muscular
endurance. Perform the work sets with enough weight to be able to stop just short of
failure at the prescribed number of reps for each set. You should have an experienced
spotter with you at all times for safety reasons.
Do Not Be Confused By A Temporary Loss Of Strength
When you begin the “Blast Your Bench II” workout routine you may experience a
temporary loss of strength during the first few workouts. Do not panic if this happens.
You are not doing anything wrong. Your body is just adjusting to the extra muscle
stimulation that you are providing it.
Stick with the workout charts. There is a rebounding effect that will occur following this
period, where your body will make tremendous gains in strength and muscle size.
While doing the bench press it is vital that you use proper exercise technique to
maximize your strength and power, and minimize the risk of injury.


“Blast Your Bench II” page 39

Week #1
Set
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time
3 mins
1 min
3 mins
1 min
3 mins






1
10 reps
15 reps
3 reps
15 reps
3 reps
2
8 reps
15 reps
3 reps
15 reps
3 reps
3
6 reps
15 reps
3 reps
15 reps
3 reps
4
4 reps
15 reps
3 reps
15 reps
3 reps
5
2 reps
15 reps
3 reps
15 reps
3 reps


Week #2
Set
Monday
Tuesday Wednesday
Thursday
Friday
Rest time
3 mins
1 min
3 mins
1 min
3 mins






1
10 reps
15 reps
10 reps
15 reps
10 reps
2
8 reps
15 reps
8 reps
15 reps
8 reps
3
6 reps
15 reps
6 reps
15 reps
6 reps
4
4 reps
15 reps
4 reps
15 reps
4 reps
5
2 reps
15 reps
2 reps
15 reps
2 reps


“Blast Your Bench II” page 40

Week #3
Set
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time
2 mins
2 mins
2 mins
2 mins
5 mins






1
3 reps
3 reps
3 reps
3 reps
3 reps
2
3 reps
3 reps
3 reps
3 reps
3 reps
3
3 reps
3 reps
3 reps
3 reps
3 reps
4
3 reps
3 reps
3 reps
3 reps
3 reps
5
3 reps
3 reps
3 reps
3 reps
3 reps

You must get a stopwatch in order to keep track of your rest times in between each
set. A common mistake that people make is just waiting until they have caught their
breath and jump right to the next set. For the majority of your workouts this is fine,
but in order to make the best gains possible in the “Blast Your Bench” program you
have to stick to the rest times in between sets very strictly.
For the days that you rest 3 minutes between sets it may seem like you are wasting
time, just sitting on the end of the bench waiting to do your next set. But you need to
rest the full 3 minutes in order to allow your muscles to handle maximum poundage.
And on the days when you only get 1 minute rest in between sets, by the time you get
to the 3rd set you will be huffing and puffing and you will not be able to handle
heavy weights. You will be amazed at how fatigued that you get, but on these days it
is critical that you only give yourself 1 minute rest between sets.
“Blast Your Bench II” page 41

You should lift enough weight so that you can do the required number of reps for each
set.
For example, on Monday of Week 1 the reps go like this:
Set 1 - 10 reps
Set 2 - 8 reps
Set 3 - 6 reps
Set 4 - 4 reps
Set 5 - 2 reps
Set 1: Lift enough weight so that you can do 10 reps.
Rest for 3 minutes, add some weight to the bar for set 2.
Set 2: Lift enough weight so that you can do 8 reps.
Rest for 3 minutes, add some weight to the bar for set 3.
Set 3: Lift enough weight so that you can do 6 reps.
Etc...
It will take a couple of workouts to find out exactly how much weight to lift for each set.
For example, if you cannot complete all of the reps, then for the next workout you will
have to lighten the weight. Or if you find that the weights were too light then you will
have to add more weight.
Tip: Do not lift too much weight on the first couple sets and tire yourself out, it is better
to save your strength for the last few sets so you can lift maximum weight.
“Blast Your Bench II” page 42

On the days where you do 15 reps per set and only rest 1 minute you will start with a
heavier weight for the first set and you will need to reduce the weights for the other sets
as you fatigue.
For example, on Tuesday of Week 1 the reps go like this:
Set 1 - 15 reps
Set 2 - 15 reps
Set 3 - 15 reps
Set 4 - 15 reps
Set 5 - 15 reps
Set 1: Lift enough weight so that you can get 15 reps.
Rest for 1 minute, you may have to lighten the weight for set 2.
Set 2: Lift enough weight so that you can get 15 reps.
Rest for 1 minute, you may have to lighten the weight for set 3.
Set 3: Lift enough weight so that you can get 15 reps.
Etc...
Tip: when doing the high reps sets, try to do the reps as fast as possible. This will help
you get the required reps and help to develop explosive power.
The 15 rep workouts with only 1 minute rest in between sets are a killer! Most
people are amazed at just how quickly they fatigue by training this way. Even the
strongest guys are using light weights by the time they get to those last couple sets.
But this type of training is part of the reason that the "Blast Your Bench" program
works so well. Most people never train this way, but when they do it really helps to
spur on new muscle growth.
Note: you can refer to our "One Rep Max Chart" to help you find out how much weight
you should lift for each set.
“Blast Your Bench II” page 43

To give you an idea of how the weights will go here is an example of someone who
bench presses 240 lbs. for a 1 rep max.
Actual workout weights may vary, but this will give you an idea of how to adjust the
weights in the workouts.
For the pyramid style workouts (i.e. 10 reps, 8 reps, 6 reps, etc.) the reps and weight
go like this:
Set 1 - 10 reps with 180 lb.
Set 2 - 8 reps with 190 lb.
Set 3 - 6 reps with 200 lb.
Set 4 - 4 reps with 210 lb.
Set 5 - 2 reps with 220 lb.
Next time you do this workout try to add 5 lb. to each set. For example, Set 1 - 10 reps
with 185 lb. Set 2 - 8 reps with 195 lb. Set 3 - 6 reps with 205 lb. etc...
For the fast paced 15 rep workouts the reps and weight go like this:
Set 1 - 15 reps with 160 lb.
Set 2 - 15 reps with 160 lb.
Set 3 - 15 reps with 150 lb.
Set 4 - 15 reps with 150 lb.
Set 5 - 15 reps with 140 lb.
Next time you do this workout try to add 5 lb. to each set. For example, Set 1 - 15 reps
with 165 lb. Set 2 - 15 reps with 165 lb. Set 3 - 15 reps with 155 lb. etc...
For the heavy 3 rep workouts the reps and weight go like this:
Set 1 - 3 reps with 210 lb.
Set 2 - 3 reps with 210 lb.
Set 3 - 3 reps with 210 lb.
Set 4 - 3 reps with 210 lb.
Set 5 - 3 reps with 210 lb.
If you can complete all of the reps then the next time you do this workout try to add 5 lb.
to each set. For example, Set 1 - 3 reps with 215 lb. Set 2 - 3 reps with 215 lb. Set 3 - 3
reps with 215 lb. etc...
“Blast Your Bench II” page 44

It is ok to bench press 5 days a week for the course of the 3 week "Blast Your Bench II"
routine. But if you were to continue doing this volume of work for longer then 3 weeks it
could lead to overtraining. Just follow the routine exactly as it is laid out in the workout
charts you will make good gains in strength and muscle growth.
In the second part of the "Blast Your Bench II" program, the 3 week squat routine, you
do not even do the bench press. Instead, you work your chest, shoulders, and triceps with
different exercises. This helps to prevent any joint injuries from repetitive motion (i.e.
doing the same exercise everyday) and you can stimulate new strength and muscle
growth by working the muscles with different movements.
A: Assistance Exercise Workout
Do these exercises after the 5 sets of bench press. You can refer to the exercise pictures
shown in section 4. Assistance Exercises.
Workout A:
- Bent Over Dumbbell Flyes - 3 sets of 10-12 reps
- Bent Over Barbell Rows - 3 sets of 10-12 reps
- Standing Dumbbell Curls - 3 sets of 10-12 reps
- Ab crunches - 3 sets of 25-50 reps
Workout B:
- Squats or Leg Press - 3 sets of 10-12 reps
- Standing Calf Raises - 3 sets of 15 reps
- Ab crunches - 3 sets of 25-50 reps
Alternate between Workouts A and B (i.e. on Monday do Workout A, on Tuesday do
Workout B, on Wednesday do Workout A, on Thursday do Workout B, etc.) For these
exercises rest long enough between sets to catch your breath.
If you feel extra sore on a day that you are supposed to train, take that day off from
training. It is best to play it safe then to risk the chance of injury. If you have to do this,
simply move the entire program ahead 1 day.
For example, lets say that you were very sore and had to skip Tuesday's workout. On
Wednesday you would then perform the workout that was scheduled for Tuesday. On
Thursday you would perform the workout that was scheduled for Wednesday, etc.
It is important that you complete all workouts that are listed in the workout charts in
order to get the maximum benefit from this program.
“Blast Your Bench II” page 45

8. Additional Information

You may want to have a cup of coffee or a caffeine pill prior to working out to help give
you an extra energy boost. This may not be appropriate for everyone so use your own
judgement on this.
You may want wear weight lifting gloves to help you get a better grip on the bar. Or you
may want to use chalk on the bar to help you get a better grip. Note: some gyms do not
allow you to use chalk
You may want to wear a pair of wrist wraps to help support and stabilize your wrists.
This can help you move more weight to make doing the bench press more comfortable.
You should wear comfortable workout clothing. I recommend wearing a sweatshirt while
doing the bench press because it will keep your muscles and joints warm and help to
prevent injury.
Use the same bench and barbell each time you bench press. Some benches may be set at
different heights, or the padding may be different. Pick a bench that you are comfortable
with and use it every time you bench. The same thing goes for barbells; some bars have a
smooth grip, other have a rough grip. Pick one that you are comfortable with and bench
with the same bar each time.
Make sure that the bench you are using is in alignment with the ceiling tiles. This will
help you to keep the bar straight and level when benching. If you are lying down on the
bench and looking up at the ceiling on an angle it will distract you.
Make sure that you get at least 8 hours of sleep each night. A lot of muscle growth and
recovery take place during sleep. It is vital that you have good consistent sleeping pattern
while following the "Blast Your Bench" program.
Try to avoid using alcohol or other drugs while follow the "Blast Your Bench" program.
Alcohol will lower your testosterone levels and dehydrate your body.
Keep a record of your workouts. Write down every set and rep that you do during your
workouts. This way each workout you can try and improve what you did for your
previous workout. Note: there are sample workout charts at the end of the program that
you can use to keep track of your progress.
“Blast Your Bench II” page 46

9. One Rep Max Chart

You can refer to this chart to help you find out how much weight you should be lifting
during your workouts. This chart is not 100% accurate because individuals vary and some
people may be able to lift more or less then is listed in the chart. However, it will give
you an idea of where to start so you can adjust your weights accordingly.
In the vertical column find the weight you use, in the horizontal column find the number
of reps that you can perform with that weight. Go to where the weight and reps intersect
in the chart and find your 1 rep max.
I have divided the chart into 2 sections to make it easier to see the number of reps at the
top of the chart and the weights going down the side of the chart.

“Blast Your Bench II” page 47

Reps
2
3
4
5
6
7
8
9
10
Weight in lbs.
_
_
_
_
_
_
_
_
_
75
80
80
85
85
90
90
95
95
100
85
90
90
95
95
100 100 105 105 110
95
100 105 105 110 110 115 115 120 125
105
110 115 115 120 125 125 130 135 135
115
120 125 130 130 135 140 140 145 150
125
130 135 140 145 145 150 155 160 160
135
145 145 150 155 160 165 165 170 175
145
155 160 160 165 170 175 180 185 190
155
165 170 175 180 180 185 190 195 200
165
175 180 185 190 195 200 205 210 215
175
185 190 195 200 205 210 215 220 225
185
195 200 205 210 220 225 230 235 240
195
205 210 220 225 230 235 240 245 255
205
215 225 230 235 240 250 255 260 265
215
225 235 240 245 255 260 265 275 280
225
240 245 250 260 265 270 280 285 290
235
250 255 265 270 275 285 290 300 305
245
260 265 275 280 290 295 305 310 320

“Blast Your Bench II” page 48


Reps
2
3
4
5
6
7
8
9
10
Weight in lbs.
_
_
_
_
_
_
_
_
_
255
270 275 285 295 300 310 315 325 330
265
280 290 295 305 310 320 330 335 345
275
290 300 310 315 325 330 340 350 355
285
300 310 320 325 335 345 355 360 370
295
310 320 330 340 350 355 365 375 385
305
325 330 340 350 360 370 380 385 395
315
335 345 350 360 370 380 390 400 410
325
345 355 365 375 385 395 405 410 420
335
360 370 380 390 400 410 420 430 440
345
365 375 385 395 410 420 430 440 450
355
375 385 395 410 420 430 440 450 460
365
385 395 410 420 430 440 450 465 475
375
395 410 420 430 445 455 465 475 485
385
405 420 430 440 450 465 475 490 500
395
420 430 440 450 465 475 490 500 510
405
425 440 450 465 475 490 500 515 525

“Blast Your Bench II” page 49

To find out how much weight you should lift for each set you simply find the number of
reps at the top of the chart. Go down that column until you find your 1 rep max. Then go
over to the far left of that row and find the weight you should lift.
For example, if you want to do a set of 10 reps and your 1 rep max is 200 lbs.
• go to the 10 rep column on the chart
•
follow the column down until you find 200
• go to the far left of the row and you will find 155
So for a 1 rep max of 200 lbs. you should be able to lift approximately 155 lbs. for 10
reps.
Here is another example, let's say you wanted to a set of 4 reps and your 1 rep max is 350
lbs.
• go to the 4 rep column on the chart
•
follow the column down until you find 350
• go to the far left of the row and you will find 315
So for a 1 rep max of 350 lbs. you should be able to lift approximately 315 lbs. for 4
reps.
For 15 rep sets simply take your 1 rep max and multiply it by 0.66
For example,
1 rep max = 200
200 X 0.66 = 132
Round off the number, so for a 200 lbs. 1 rep max you should be able to lift
approximately 135 lbs. for 15 reps.
“Blast Your Bench II” page 50

Just to make it easier for you I have included some sample sets, reps, and weights.
Note: you may have to use more or less weight then is listed here, but this will give you a
good idea of were to start from.
When doing your workouts it is best to hold back slightly and stop short of failure
rather then pushing yourself all out. This will make it easier to make strength gains
on a more consistent basis.
Do not lift too heavy and wear yourself out on the first couple of sets, save your
strength for the last few sets. These sets are the ones that work the fast twitch
muscle fibers and are responsible for strength gains.
For a 1 rep max of 150 lbs.
15 reps with 100 lbs.
10 reps with 110 lbs.
8 reps with 115 lbs.
6 reps with 120 lbs.
4 reps with 125 lbs.
2 reps with 130 lbs.
For a 1 rep max of 175 lbs.
15 reps with 115 lbs.
10 reps with 125 lbs.
8 reps with 135 lbs.
6 reps with 145 lbs.
4 reps with 150 lbs.
2 reps with 155 lbs.
For a 1 rep max of 200 lbs.
15 reps with 135
10 reps with 145 lbs.
8 reps with 155 lbs.
6 reps with 165 lbs.
4 reps with 175 lbs.
2 reps with 185 lbs.
For a 1 rep max of 225 lbs.
15 reps with 150 lbs.
10 reps with 170 lbs.
8 reps with 180 lbs.
6 reps with 190 lbs.
4 reps with 195 lbs.
2 reps with 205 lbs.
“Blast Your Bench II” page 51

For a 1 rep max of 250 lbs.
15 reps with 165 lbs.
10 reps with 180 lbs.
8 reps with 190 lbs.
6 reps with 205 lbs.
4 reps with 215 lbs.
2 reps with 225 lbs.
For a 1 rep max of 275 lbs.
15 reps with 185 lbs.
10 reps with 200 lbs.
8 reps with 210 lbs.
6 reps with 225 lbs.
4 reps with 235 lbs.
2 reps with 245 lbs.
For a 1 rep max of 300 lbs.
15 reps with 190 lbs.
10 reps with 225 lbs.
8 reps with 235 lbs.
6 reps with 245 lbs.
4 reps with 260 lbs.
2 reps with 270 lbs.
For a 1 rep max of 325 lbs.
15 reps with 215 lbs.
10 reps with 235 lbs.
8 reps with 250 lbs.
6 reps with 265 lbs.
4 reps with 280 lbs.
2 reps with 295 lbs.
For a 1 rep max of 350 lbs.
15 reps with 225 lbs.
10 reps with 250 lbs.
8 reps with 270 lbs.
6 reps with 290 lbs.
4 reps with 310 lbs.
2 reps with 320 lbs.
“Blast Your Bench II” page 52

10. Nutrition Charts

BEVERAGES

MEASURE CALORIES CARBS PROTEIN FAT
Coffee, black
1 cup
5
<1g
<1g
<1g
Soft drinks
1 cup
94
19g
0g
0g
Fruit flavored drinks
1 cup
110
29g
0g
0g
Diet drinks
1 cup
<1
0g
0g
0g
BREADS, CEREALS & GRAINS

MEASURE CALORIES CARBS PROTEIN FAT
White, enrich
1 slice
62
12g
2g
<1g
Whole wheat
1 slice
56
11g
3g
<1g
Corn flakes
1 cup
100
21g
2g
<1g
Shredded wheat
1 biscuit
89
20g
3g
<1g
Oat bran
3/4 cup
121
21g
5g
2g
Cream of wheat
1 cup
133
28g
5g
<1g
Macaroni, ckd.
1 cup
150
32g
5g
1g
Muffins bran
1 avg
105
17g
3g
4g
Oatmeal ckd.
1 cup
130
23g
5g
2g
Pasta raw
4 oz
400
78g
20g
1g
Rice, brown raw
1 cup
700
150g
15g
4g
Brown, cooked
1 cup
180
38g
4g
1g
Rices, white raw
1 cup
710
157g
13g
2g
White, cooked
1 cup
225
50g
4g
<1g
Dinner rolls, white
1 avg
115
20g
3g
2g
Whole wheat
1 avg
90
18g
4g
1g
Spaghetti, ckd.
1 cup
150
32g
5g
<1g

“Blast Your Bench II” page 53
DAIRY PRODUCTS

MEASURE CALORIES CARBS PROTEIN FAT
Cheese
Cheddar
1 oz
115
<1g
7g
10g
Mozzarella
1 oz
80
<1g
6g
7g
Parmesan
1 tbs
25
<1g
2g
2g
Cottage, lowfat
1/2 cup
80
1g
16g
1g
Cream
Sour
1 cup
495
10g
8g
49g
Whipping
1 cup
700
7g
5g
74g
Eggs
Raw, large
1
80
<1g
6g
6g
Raw, white
1
20
<1g
4g
0g
Raw, yolk
1
60
<1
2g
6g
Milk
Whole
1 cup
160
12g
8g
9g
Skim
1 cup
90
12g
9g
<1g
Evaporated
1 cup
340
25g
18g
19g
Yogurt
Regular
8 oz
140
11g
8g
7g
Low-fat
8 oz
125
18g
13g
<1g
Low-fat fruit
8 oz
225
43g
9g
2g
SEAFOOD

MEASURE CALORIES CARBS PROTEIN FAT
Cod
1 lb
415
1g
80g
8g
Flounder
1 lb
400
<1g
85g
7g
Oysters, fresh
1 lb
300
15g
38g
8g
Canned
1 cup
160
8g
20g
5g
Salmon
1 lb
980
0g
100g
60g
Sockeye, cnd
1 cup
375
0g
45g
15g
Tuna, oil pk.
1 cup
315
0g
46g
13g
Water packed
1 cup
250
0g
55g
2g
“Blast Your Bench II” page 54

FRUIT & FRUIT JUICES

MEASURE CALORIES CARBS PROTEIN FAT
Apple
1 med
100
24g
<1g
1g
Apple sauce
1/2 cup
40
7g
1g
1g
Apricots
4 avg
100
21g
1g
1g
Banana
1 avg
125
33g
2g
1g
Fruit salad
1 cup
195
50g
1g
1g
Grapefruit
1/2 med
40
11g
<1g
<1g
Orange
1 avg
65
15g
1g
<1g
Juice, unsw
1 cup
115
26g
2g
<1g
Peach
1 med
40
10g
<1g
<1g
Prunes
6 med
170
38g
2g
1g
Raisins
1 cup
475
130g
4g
1g
MEAT & POULTRY

MEASURE CALORIES CARBS PROTEIN FAT
Beef
Lean
1 lb
815
0g
95g
45g
Regular
1 lb
1220
0g
82g
95g
Chicken
Back
1 lb
400
0g
40g
40g
Breast
1 lb
385
0g
75g
17g
Drumstick
1 lb
395
0g
50g
30g
Pork
Bacon
1 lb
3015
5g
38g
315g
Sausage
1 lb
1785
12g
60g
165g
Turkey
Dark Meat
1 lb
920
0g
135g
38g
Light meat
1 lb
800
0g
150g
18g

“Blast Your Bench II” page 55

NUTS

MEASURE CALORIES CARBS PROTEIN FAT
Almonds
10 med
65
1g
2g
6g
Peanut butter
1 tbs
85
3g
4g
8g
Peanuts
1 cup
840
30g
38g
70g
Walnuts
1/4 cup
190
6g
5g
15g
OILS & SAUCES

MEASURE CALORIES CARBS PROTEIN FAT
Butter
1 tbs
100
<1g
<1g
12g
Margarine
1 tbs
100
<1g
<1g
12g
Corn oil
1 tbs
125
0g
0g
14g
Olive oil
1 tbs
125
0g
0g
14g
Peanut oil
1 tbs
125
0g
0g
14g
Safflower oil
1 tbs
125
0g
0g
14g
Sunflower oil
1 tbs
125
0g
0g
14g
B.B.Q. sauce
1 tbs
15
2g
<1g
1g
Jams
1 tbs
55
13g
<1g
0g
Low-sugar
1 tbs
21
5g
<1g
0g
Honey
1 tbs
100
25g
0g
0g
Mayonnaise
Regular
1 tbs
100
<1g
<1g
11g
Fat-free
1 tbs
16
5g
0g
0g

Salad dressing
Regular
1 tbs
80
3g
<1g
8g

Low-fat
1 tbs
25
2g
<1g
2g


“Blast Your Bench II” page 56

VEGETABLES

MEASURE CALORIES CARBS PROTEIN FAT
Broccoli
1 piece
33
6g
4g
<1g
Carrots
1 Lg
43
10g
1g
<1g
Corn
1 cup
135
30g
5g
2g
Cream style
1cup
210
52g
5g
2g
Cucumber
1 Lg
45
8g
2g
<1g
Green peas
1/2 cup
58
11g
3g
<1g
Kidney beans
1 cup
170
30g
10g
1g
Lima beans
1 cup
233
39g
12g
1g
Lettuce
1 lb
55
11g
1g
<1g
Potatoes
1 med
90
18g
3g
<1g
Sprouts
3/4 cup
55
8g
4g
<1g
Vegetable soup
1 cup
83
17g
2g
1g
Yams
1 med
150
34g
2g
<1g

“Blast Your Bench II” page 57

Special Bonus "Blast Your Squat"

I created this modified version of the program because I was constantly getting e-mails
from people who had completed the "Blast Your Bench" program and were so pleased
with their gains, that they wanted to apply the program to other exercises, especially the
squat.
The reason why the regular "Blast Your Bench" program works for the bench press and
not the squat is because upper body muscles can handle more frequent heavy workouts
then lower body muscles.
The squat is probably the most physically demanding exercise that you can do, but it is
also one of the most productive exercises for building muscle mass, strength, and power
in the entire body.
The squat places more stress on the body then the bench press, so in the "Blast Your
Squat" routine we will only work the squat 3 days per week (unlike the 5 bench days per
week in the "Blast Your Bench" routine). This will allow your body time to recover and
make tremendous gains in strength.
“Blast Your Bench II” page 58
A: Proper Squat Technique
When you get under the bar look straight ahead and flex your traps. This will help you
maintain proper form and prevent the bar from crushing your shoulders.
Grab the bar just a bit wider then shoulder width. Tighten your entire body and squeeze
your shoulder blades together behind you.
Squat with your feet wider then shoulder width apart. When you squat wide you create
better leverage for the squat. The distance between your knee and hip is shorter in a wider
stance squat. This allows you to lift heavier weights.
You must keep your knees out during the entire rep, do not let them turn in. Push out on
the sides of your shoes while you squat. This keeps your body tight.
Place the emphasis on the glutes, thighs, and lower back. Keep your toes straight ahead or
just slightly turned out. Arch your back and expand your belly. Keep your shoulder
blades pulled together to tighten the upper back, this helps keep the barbell in the proper
position. Stay tight as you squat down. When your thighs are parallel to the floor,
rebound out of the bottom position and drive the bar up using your hips, glutes, back, and
thighs.
Once you rebound out of the bottom position, focus on straightening out your legs and
driving your back up to lock out the rep.


“Blast Your Bench II” page 59

Start / Finish Position of the Squat

Midpoint of the Squat



“Blast Your Bench II” page 60


Before you start the "Blast Your Squat" routine you need to determine your current 1 rep
max. After you finish the program you will determine your 1 rep max again in order to
judge your progress.
To determine your 1 rep max in the squat follow the same process as is described in
section 3. Benching For Maximum Poundage, B: Finding Your One-Rep Max.
After you complete the "Blast Your Bench" routine, you can immediately start the "Blast
Your Squat" routine.
Here are the workout charts for the "Blast Your Squat" routine.


“Blast Your Bench II” page 61

Week #1 - Blast Your Squat
Set
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time 90 secs

2 mins

3 mins






1
15 reps

10 reps

5 reps
2
15 reps
20 minutes
8 reps
20 minutes
5 reps
3
15 reps
on the
6 reps
on the
5 reps
4
15 reps stationary bike
4 reps
stationary bike 5 reps
5
15 reps

2 reps

5 reps


Week #2 - Blast Your Squat
Set
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time 90 secs

2 mins

3 mins






1
15 reps

10 reps

5 reps
2
15 reps
20 minutes
8 reps
20 minutes
5 reps
3
15 reps
on the
6 reps
on the
5 reps
4
15 reps stationary bike
4 reps
stationary bike 5 reps
5
15 reps

2 reps

5 reps


“Blast Your Bench II” page 62

Week #3
Set
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time 2 mins

2 mins

5 mins






1
5 reps

3 reps

3 reps
2
5 reps
20 minutes
3 reps
20 minutes
3 reps
3
5 reps
on the
3 reps
on the
3 reps
4
5 reps
stationary bike
3 reps
stationary bike 3 reps
5
5 reps

3 reps

3 reps

In this routine you will ride the stationary bike for 20 minutes 2 times per week (as is
shown in the charts) to help speed up recovery and aid in muscle growth.
Note: you can do another form of aerobic exercise in place of the stationary bike (i.e.
walking, treadmill, ski machine, etc.)
As in the "Blast Your Bench" routine, you should lift enough weight so that you can only
do the required number of reps required for each set.
“Blast Your Bench II” page 63
For the 15 rep days:
Note: This is going to be the most difficult workout of the "Blast Your Squat" routine. The
high reps and relatively short rest times will really make you work hard. But the gains
that you will make are well worth it.
Set 1 - 15 reps
Set 2 - 15 reps
Set 3 - 15 reps
Set 4 - 15 reps
Set 5 - 15 reps
Set 1: Lift enough weight so that you can get 15 reps.
Rest for 90 seconds, you may have to lighten the weight for set 2.
Set 2: Lift enough weight so that you can get 15 reps.
Rest for 90 seconds, you may have to lighten the weight for set 3.
Set 3: Lift enough weight so that you can get 15 reps.
Etc...
Note: you can refer to our "One Rep Max Chart" to help you find out how much weight
you should lift for each set.
For the pyramid style workouts (i.e. 10 reps, 8 reps, 6 reps, etc.)
Set 1: Lift enough weight so that you can do 10 reps.
Rest for 2 minutes, add some weight to the bar for set 2.
Set 2: Lift enough weight so that you can do 8 reps.
Rest for 2 minutes, add some weight to the bar for set 3.
Set 3: Lift enough weight so that you can do 6 reps.
Etc...
It will take a couple of workouts to find out exactly how much weight to lift for each set.
For example, if you do the first set and you can do 12 reps, then for the next workout you
will have to lift more weight so you can only get 10 reps.
“Blast Your Bench II” page 64

For the heavy 3 rep and 5 rep workouts:
Set 1: Lift enough weight so that you can do 3 reps (or 5 reps)
Rest for the required amount of time, you may have to reduce the weight for set 2.
Set 2: Lift enough weight so that you can do 3 reps (or 5 reps)
Rest for the required amount of time, you may have to reduce the weight for set 3.
Set 3: Lift enough weight so that you can do 3 reps (or 5 reps)
Rest for the required amount of time, you may have to reduce the weight for set 4.
Etc...
As in the "Blast Your Bench" program, each workout you should try and add 5 lb. to your
previous workout weight.
B: Assistance Exercises
For you legs and lower back you will do the Squat routine as is shown in the workout
charts.
For the assistant exercises you will do:
Bent Over Dumbbell Flyes:
This is the same exercise as is listed in section 4. Assistant Exercises. This exercise will
help to develop the rear deltoids and upper back. Well-developed upper back and
shoulder muscles will make having a heavy barbell on your shoulders more comfortable.

“Blast Your Bench II” page 65


Start / Finish Position of the Bent Over Dumbbell Flye


Midpoint of the Bent Over Dumbbell Flye





“Blast Your Bench II” page 66

Ab Crunch:
This is the same exercise as is listed in section 4. Assistant Exercises. This exercise will
develop the abdominals. The back and abdominals are the centre of the body so
developing these muscles is vital to improving your strength and power in all exercises.


Start / Finish Position of the Ab Crunch

Midpoint of the Ab Crunch




The next 3 exercises will help you to further improve upon the gains that you make
during the "Blast Your Bench" program, while giving your tendons and joints some
time off from heavy bench pressing.
“Blast Your Bench II” page 67
Dips:
This exercise works the chest, front deltoids, and triceps.


Start / Finish Position of the Dip

Midpoint of the Dip



“Blast Your Bench II” page 68

Close Push Ups:
This exercise targets the triceps. Place your hands spaced shoulder width apart.


Start / Finish Position of the Close Push Up

Midpoint of the Close Push Up


“Blast Your Bench II” page 69
1 Arm Overhead Dumbbell Extensions:
This exercise isolates the triceps.


Start / Finish Position of the
1 Arm Overhead Dumbbell Extension


Midpoint of the
1 Arm Overhead Dumbbell Extension


“Blast Your Bench II” page 70

C: Assistance Exercise Workout Routine
Do these exercises after the 5 sets of squats.
Workout A:
• Bent Over Dumbbell Flyes - 3 sets of 10-12 reps
• Dips - 3 sets of 10-12 reps
• Ab crunches - 3 sets of 25-50 reps
Workout B:
• Close Push ups - 3 sets of as many reps as you can do
• 1 Arm Overhead Dumbbell Extensions - 3 sets of 10-12 reps
• Barbell Curls - 3 sets of 10-12 reps
• Ab crunches - 3 sets of 25-50 reps
Alternate between Workouts A and B (i.e. on Monday do Workout A, on Wednesday do
Workout B, on Friday do Workout A, etc.) For these exercises rest long enough between
sets to catch your breath.
It is important that you complete all workouts that are listed in the workout charts in
order to get the maximum benefit from this program.
“Blast Your Bench II” page 71
General Workout Routines

After you complete the "Blast Your Bench" and "Blast Your Squat" routines you will
have to adjust your workouts so that you develop all your muscle groups equally.
You should still organize your workout routines so that you include both heavy power
style workouts to maximize testosterone levels, and lighter fast paced workouts to
maximize growth hormone levels. This is the most effective approach for building
muscle in the fastest time possible.
A good way to incorporate both types of workouts is to divide your workouts so you
work half of your body one day and the other half the next. For example, you can work
your back, chest, biceps, and calves in one workout. And train your shoulders, thighs,
triceps, and abs in the next workout.
“Blast Your Bench II” page 72

A sample workout out routine may look like this:
Monday (heavy power day approx 5-8 reps per set):
• chest
• back
• biceps
• calves
Tuesday (heavy power day approx 5-8 reps per set):
•
shoulders
•
thighs
•
triceps
• abs
Wednesday: REST
Thursday (light fast paced day approx 12-15 reps per set):
• chest
• back
• biceps
• calves
Friday (light fast paced day approx 12-15 reps per set):
•
shoulders
•
thighs
•
triceps
• abs
Saturday: REST
Sunday: REST
Pick 2 exercises for each bodypart and do 2-3 work sets for each exercise after 1-2 warm
up sets. You should vary the exercises that you do for each bodypart every couple of
weeks. This way you will keep your muscles growing while making sure that your joints
a do not take too much punishment. For example, if you were to do heavy bench presses
every week, eventually your shoulder joints and elbows may develop pain and tendonitis.
By switching your exercises every couple of weeks you will prevent this because the
muscles and joints get worked at different angles.
“Blast Your Bench II” page 73

Here are some sample exercises that you can do for each bodypart:
Chest:
• bench press (incline, decline, and flat)
• dumbbell bench press (incline, decline, and flat)
• dumbbell flyes (incline, decline, and flat)
• pec deck flyes
• dips
• push ups
Back:
• dead lifts
• bent barbell rows
• chin ups
• pull downs
•
seated cable rows
• 1 arm dumbbell rows
Shoulders:
• military press
• dumbbell press
•
side lateral raises
•
front lateral raises
• bent lateral raises
• up right rows
•
shrugs
Thighs:
•
squats
•
leg press
• hack squats
•
stiff leg dead lifts
•
leg extensions
•
leg curls
“Blast Your Bench II” page 74
Biceps:
• barbell curls
• dumbbell curls
• preacher curls
• cable curls
Triceps:
• close grip bench press
•
tricep dips
• cable push downs
• 1 arm dumbbell extensions
•
lying ez bar extensions
Forearms:
• barbell wrist curls
• barbell reverse writs curls
• dumbbell writs curls
• dumbbell reverse wrist curls
Calves:
•
standing calve raises
•
seated calve raises
• 1 leg calve raises
• donkey calve raises
Abs:
• crunches
•
reverse crunches
•
leg raises
• overhead cable crunches
• hyper extension sit ups
“Blast Your Bench II” page 75
If you want you can add in an extra training day and work any weak bodyparts. For
example, if your calves and forearms are lagging behind your other bodyparts, you could
go to the gym on one of your off days and do some extra work for those bodyparts.
After 3 months of focusing on working your entire body and developing your weak
bodyparts, you should try the "Blast Your Bench" and "Blast Your Squat" routines again
to boost your strength and power even further.
Remember, if you have any questions or comments about the program, please e-
mail me at: help@leehayward.com
After you finish your program please e-mail me and let me know about your
progress!
Good luck with your training,

“Blast Your Bench II” page 76
Workout Charts to Track Your Progress
Use these charts to record the rest time, weight lifted, and repetitions done for each
workout.

Week 1 - Blast Your Bench
Sets
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time











1










2










3










4










5













Week 2 - Blast Your Bench
Sets
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time











1










2










3










4










5











“Blast Your Bench II” page 77


Week 3 - Blast Your Bench
Sets
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time











1










2










3










4










5













“Blast Your Bench II” page 78



Week 1 - Blast Your Squat
Sets
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time











1










2










3










4










5













Week 2 - Blast Your Squat
Sets
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time











1










2










3










4










5












“Blast Your Bench II” page 79

Week 3 - Blast Your Squat
Sets
Monday
Tuesday
Wednesday
Thursday
Friday
Rest time











1










2










3










4










5











“Blast Your Bench II” page 80




Special Report
The Secret to Getting “Six-Pack” Abs
Nearly everyone wants great abdominal muscles. It doesn’t matter if you are a man or a
woman, well developed abs look a lot better then a spare tire. In this report you will learn
where most people make mistakes in trying to develop great abdominals. We’ll show you
how you can avoid making the same mistakes and once and for all get the “six pack” abs
that you desire.
Your abs are part of your core musculature. They, along with your lower back, are
responsible for good posture and are essential to a well toned, fit body. They assist in
dozens of movements and exercises. And they help you feel strong and centered.
The key to developing good abs first starts with a good diet, cardio, and strength training.
A lot of people get confused, trying that by doing hundreds of crunches they will get
wash board abs. But you have to lose the body fat and perform exercises that target the
abdominal muscles. Everyone has abs, but unless you lose the body fat that is covering
your abs you’ll never see them.
If you ever want to see your abs, fat loss is the only way! Many people will dispute this,
but I'm sorry, it's the truth. No amount of crunches, ab gadgets or special hanging
abdominal exercises will make your abs magically appear. You cannot spot reduce. In
other words, you can't burn abdominal fat simply by doing abdominal exercises. Your
body doesn't work that way.
If fat is covering your abs, implementing a consistent fat loss diet, coupled with moderate
exercise is the only way to reveal your "six-pack". It was not until I started eating
properly that my abs began to reveal themselves. I only work my abs 3 times per week
after weight training sessions.
Your abs are just like any other muscle, and should be worked no more than 3 times per
week with basic abdominal exercises.
“Blast Your Bench II” page 81
Fat Loss
To shed the fat quickly, aerobic exercise is essential. Many people will begin to see
results just from this alone. It not only helps to burn fat and calories during the actual
time you are exercising, but it also elevates your metabolism for hours afterwards. This
leads to greater calorie burning and fat loss throughout the day.
Any exercise that elevates your heart rate for about 30 minutes will do. I prefer riding a
stationary bike, fast pace walking, treadmill, etc. When choosing an aerobic exercise,
make sure that it keeps your heart rate elevated consistently without breaks. Stop & go
activities like team sports (i.e. basketball, football, baseball, etc.) are not adequate
candidates for our purposes. These games have too many pauses, breaks and periods of
low activity. They will not keep your heart rate elevated long enough to burn much fat or
elevate your metabolism.
It is not just doing aerobic exercise that will increase your fat loss, but when you do it.
Some aerobics instructors who teach classes every day are still soft and overweight. You
would think with that much aerobic exercise, they would be very lean and ripped. They
are not because their diets are not correct and they do not train at the correct times for fat
loss.
The only time you should be doing aerobic exercise for fat loss purposes is first thing in
the morning before your first meal. This is when you burn the most bodyfat because after
an overnight fast, blood sugar levels are low, as are carbohydrate reserves. Exercising
before you eat causes the body to burn fat for energy.
You should do 30 minutes of aerobic exercise first thing in the morning at least 5 days a
week.
“Blast Your Bench II” page 82
Diet
To lose bodyfat you must eat fewer calories than your body burns off, so eat less, but you
must not starve yourself, otherwise you will lose more muscle than fat! Start eating 6
small meals per day (space them out so you are eating every 2-3 hours). You are eating
more often, but not necessarily more food.
Increase your protein intake. Without protein your body cannot build new muscle. Protein
also helps to increase your metabolism and helps you burn more calories. You should eat
1 gram of protein per pound of bodyweight each day. So if you weigh 150 lbs. you would
eat 150 grams of protein each day.
Increase you vegetable intake. Veggies are important because they provide your body
with essential vitamins and minerals while keeping your calorie intake low. They also
have enzymes and phytochemicals that help with digestion. Many vegetables also have
natural diuretic properties so they help prevent water retention.
Increase you water intake. A good formula for this is to multiply your bodyweight by .66
to get the required number of ounces per day. I personally drink water all day long, I
carry a bottle of water with me everywhere I go.
A good tip that will help you eat right is every time you eat have a serving of a protein
food (i.e. lean beef, chicken, turkey, fish, eggs, protein shakes, etc.) a serving of a
vegetable (i.e. broccoli, brussel sprouts, cabbage, cauliflower, collards, turnip greens,
green peas, beans, carrots, asparagus, green pepper, spinach, etc.) and a serving of a
starchy carbohydrate (i.e. rice, potatoes, pasta, etc.).
“Blast Your Bench II” page 83
Training
Work your abs like any other body part. Training them more than 3 times per week is
unnecessary.
Contraction is everything when working abs. When doing crunches, you should
concentrate on crunching together rather than moving your body upwards. This will
maximize muscle tension.
You must concentrate on contracting your muscles as tight as you can. This will cause
them to fatigue faster. It does not matter how many reps you can do; the only thing that
matters is how hard you can contract your abdominal muscles.
If it takes you 100 crunches before your abs begin to burn, then you are wasting your
time. Your abs should be fatigued at no more than 25 reps per set. If they are aren't, you
need to add weights to your exercise and work on contracting the muscles tightly for each
rep. Don't concentrate so much on "how many" you can do, but instead focus on "how
hard" you can contract the abdominal muscles.
“Blast Your Bench II” page 84
Working The Abdominal Muscles
Abdominal Muscle Anatomy When training the abdominals you should pay attention to
the three primary areas of your midsection – the rectus abdominis (frontal abdominal
wall), obliques (muscles at the sides of your waist), and intercostals (bands of muscle that
run diagonally across the sides of your upper abdomen).


“Blast Your Bench II” page 85
Abdominal Exercises
It is essential that when you do any exercise that you perform the movements correctly, if
you don’t you will receive less then optimum benefit from the exercise. It is very difficult
to unlearn bad exercise habits, so it is best to learn the right exercise technique from the
very start.
Crunches
This is one of the best abdominal exercises. It works the rectus abdominis, particularly
the upper half of the fontal abdominal wall.
Start

Finish

Lie on your back on the floor. Your feet should be flat on the floor shoulder width apart
with your knees bent at a 90-degree angle. Place your hands behind your head for
support.
Without pulling on your neck, slowly lift your shoulders off the floor using your
abdominal strength. Breath out as you contract your abs. Hold this position for a couple
of seconds to maximize the peak contraction in the abs. Slowly lower yourself to the
starting position. Repeat.
“Blast Your Bench II” page 86
Reverse Crunches
This exercise works the entire abdominis muscle wall, particularly the lower half of the
muscle group.
Start

Finish

Lie on your back on the floor. Your feet should be flat on the floor shoulder width apart
with your knees bent at a 90-degree angle. Place your hands behind your head for
support.
Keeping your legs bent, slowly lift them off the floor using your abdominal strength.
Breath out as you contract your abs. Hold this position for a couple of seconds to
maximize the peak contraction in the abs. Slowly lower your legs back to the starting
position. Repeat.
Tip – to make this exercise harder you can do it with your legs out straight.
“Blast Your Bench II” page 87
Cable Crunches
This is a good all around abdominal exercise. It places intense stress on the rectus
abdominis, intercostals, and serratus muscles. Secondary stress is placed on the lower
lats.
Start

Finish

Attach a rope or handle to a high pulley and grasp the ends. Step back about 2 feet from
the pulley. Facing the weight stack, kneel down on the floor and sit back on your heels.
Hold your arms so that your hands are just above your head.
Bend forward at the waist and crunch your abdominal muscles. Breath out as you
contract your abs. Hold this position for a couple of seconds to maximize the peak
contraction in the abs. Slowly lower your legs back to the starting position. Repeat.
Tip – if you are using heavier weights you can place a flat weight plate on your calves
and feet to help hold you in position.
“Blast Your Bench II” page 88
Leg Raise
This exercise works the frontal abdominal wall, particularly the lower half of the
abdominals.
Start

Finish

Position yourself on the leg raise station. (Note: if you do not have access to a leg raise
station you can do this exercise hanging from a chin up bar). Support your bodyweight on
your forearms. Keep your torso upright. Keep a slight bend in your knees during the
exercise.
Slowly raise your legs in a semicircular arc until your legs are parallel to the floor.
Slowly lower back to the starting position. Repeat.
Tip – a less intense version of this exercise is to keep your knees bent at a 90-degree
angle during the exercise.
“Blast Your Bench II” page 89
Roman Chair Sit Ups
This exercise stresses the rectus abdominis, particularly the upper half of the frontal
abdominal wall.
Note: you can use a Decline Situp bench as shown here

Or, you can use a Roman Chair bench as shown here

Sit on a roman chair and place your feet under the foot pads to restrain your legs. (Note:
if you do not have access to a roman chair or situp bench, you can sit on the end of a high
exercise bench and have a training partner restrain your legs). Either cross your arms over
your chest, or place them behind your head to support your neck.
Slowly lower your torso until it is parallel with the floor. Hold this position for a second.
Slowly contract your abs and lift your torso back up to the starting position. Repeat.
Tip – to add resistance hold a weight plate to your chest as you do the exercise.
“Blast Your Bench II” page 90
Bar Twists
This exercise stresses the rotational aspect of your oblique muscles.
Start

Finish

Place a broomstick or light bar across your shoulders. Wrap your arms around the bar to
restrain them. Stand upright with your feet shoulder width apart, toes pointed forward.
Without moving your hips, twist your torso as far to the left side as possible, then twist to
the right side as far as possible. Twist rhythmically back and forth between the left and
right side.
This exercise should be performed with high repetitions (i.e. 25+ twists to each side).
This is a good exercise to use either as a warm up to your ab exercises or as a finishing
exercise.
“Blast Your Bench II” page 91
Dumbbell Side Bends
This exercise stresses the trunk flexion aspect of your oblique muscles. Secondary stress
is place on the forearms from gripping the dumbbell.
Start

Finish

Grab a dumbbell with one hand. Stand up right, feet shoulder width apart. Let both arms
hand down by your sides.
Bend sideways until the hand with the dumbbell is at your knee level. Then bend to the
opposite side until your free hand is at your knee level. Keep bending side to side for the
desired number of reps. Place the dumbbell in your other hand and repeat for the desired
number of reps.
“Blast Your Bench II” page 92
Frog Kicks
This exercise works the frontal abdominals, especially the lower half of the abdominal
muscles.
Start

Finish

Sit on the floor or a flat bench with your legs out straight. Place your hands palms down
behind you. Lean back slightly and use your abdominal strength to lift your legs.
Simultaneously bend your legs and bring your knees as close to your chest as possible.
Slowly straighten out your legs and return to the starting position. Repeat. Do not let your
feet touch the floor during the exercise, keep the tension on the abdominal muscles.
“Blast Your Bench II” page 93
Crunches On The Stability Ball
This exercise works the entire rectus abdominis, but because you have to balance yourself
on the ball it focuses on developing the small stabilizer muscles.
Start

Finish

Lie back on the stability ball. Place your feet flat on the floor (Note: the closer you place
your feet the harder it is to balance on the ball). Place your hands behind your head for
support.
Without pulling on your neck, slowly lift your shoulders using your abdominal strength.
Breath out as you contract your abs. Hold this position for a couple of seconds to
maximize the peak contraction in the abs. Slowly lower yourself back to the starting
position. Repeat.
Most gyms have various ab exercise machines. You may want to try some different
exercises every now and then. Perform 3-4 different exercises for 3 sets each. Abdominal
workouts should be no more then 9-12 total sets 3 times per week. This will allow the ab
muscles time to rest and grow.
“Blast Your Bench II” page 94

Don't ever worry about making your mid section too big with ab muscles, it will never
happen. The only thing that makes the mid section too big is excess bodyfat.
Advanced Fat Loss Tips
• Try using Ephedrine / Caffeine / Aspirin stack to help you lose more bodyfat.
Taking 200 milligrams of caffeine, 25 milligrams of ephedrine, and 325
milligrams of aspirin 3 times each day will help raise your metabolism, curb your
appetite, and give you an energy boost. Make sure that you take these
supplements before exercise.
• Cut back on carbohydrates at night. It is a fact that your body can not burn fat
when your insulin levels are elevated. It is also a fact that carbohydrates cause
insulin levels to go up. So it is important to limit your intake of foods such as
bread, pasta, potatoes, crackers, etc. in the evening after 6:00 p.m. Carbohydrates
eaten in the evening are more likely to be converted to bodyfat.
• Use meal replacement powders to help control your protein and carbohydrate
intake. My personal favorite is EAS Myoplex, this is a complete high protein
meal replacement and it tastes great! You should have 3 high protein food meals
and 3 high protein meal replacement drinks (such as Myoplex) each day.
• Pig Out Once a Week!!! No one can eat perfect all the time with out going crazy!
If you are craving something like cake, pie, french fries, pizza, candy, cookies,
chips, etc. save it for your “Pig Out” day. By eating what ever you want one day a
week you will keep your sanity and enable you to maintain the discipline you
need in order to lose bodyfat for the other 6 days of the week. One day a week of
“Pig Out” eating will not hinder your fat loss efforts.
• Check out http://totfit.safeshopper.com to get wholesale prices on brand name
bodybuilding supplements (i.e. meal replacements, protein powders, fat burners,
etc.)